Displaying 51 - 100 of 228 publications

2023

  1. Summaiya Javed, Arun Kumar Tiwari Performance Assessment of Different Organic Rankine Cycle (ORC) Configurations Driven by Solar Energy, Process Safety and Environmental Protection, , vol. 171, pp. 655-666, 2023. DOI : https://doi.org/10.1016/j.psep.2023.01.039 Impact Factor : 7.8
  2. K Mausam, A Pare S K Ghosh Arun Kumar Tiwari Thermal performance analysis of hybrid-nanofluid based flat plate collector using Grey relational analysis (GRA): An approach for sustainable energy harvesting, Thermal Science and Engineering Progress, , vol. 37, pp. 101609, 2023. DOI : https://doi.org/10.1016/j.tsep.2022.101609 Impact Factor : 4.8
  3. Arun Kumar Tiwari, Zafar Said N. S. Pandya H. Shah Effect of plate spacing and inclination angle over the thermal performance of plate heat exchanger working with novel stabilized polar solvent-based silicon carbide nanofluid, Journal of Energy Storage, , vol. 60, pp. 106615, 2023. DOI : https://doi.org/10.1016/j.est.2023.106615 Impact Factor : 9.4

2022

  1. Hemant Rao, Ajay Kumar Sharma A review on the Environmental Consequences of Proton Exchange Membrane Fuel cell by cultivating thermal and water management, Neuroquantology, , vol. 2014, pp. 683-702, 2022.
  2. Devendra Singh, Ajay Kumar Sharma Energy, exergy and enviroeconomic analysis of modified multi-wick basin type inverted absorber solar still, Journal of Mechanical Science and Technology , , vol. Volume 36, pp. pages 1003–1013, 2022. DOI : DOI:10.1007/s12206-022-0146-2 Impact Factor : 1.81
  3. Devendra Singh, Ajay Kumar Sharma Experimental Performance of Modified Multi-Wick Basin-Type Inverted Absorber Solar Still, Arab J Sci Eng , , , , 2022. Impact Factor : 2.807
  4. Rajeev Singh, Avadesh K Sharma Ajay K Sharma Enhancement of mechanical and bioactive characteristics of NiTiMD composite reinforced with waste marble dust, International Journal of Materials Research, , vol. 1131, pp. 44-59, 2022. DOI : https://doi.org/10.1515/ijmr-2021-8258 Impact Factor : 0.678
  5. Deepa Ahirwar, Amit Telang Rajesh Purohit Anurag Namdev A short review on polyurethane polymer composite, Materials Today: Proceedings , , vol. 62, pp. 3804-3810, 2022. DOI : https://doi.org/10.1016/j.matpr.2022.04.481
  6. P.S. Yadav, Rajesh Purohit Anurag Namdev Physical and mechanical properties of hybrid composites using Kevlar fibre and nano-SiO2, Advances in Materials and Processing Technologies , , vol. 8, pp. 2057-2069 , 2022. DOI : https://doi.org/10.1080/2374068X.2022.2034312
  7. Ashish Kumar, Ravindra Singh Rana Rajesh Purohit Anurag Namdev, Kuldeep K Saxena Optimization of dry sliding wear behavior of Si3N4 and Gr reinforced Al-Zn-Mg-Cu composites using Taguchi method, Journal of Materials Research and Technology, , vol. 19, pp. 4793-4803, 2022. DOI : https://doi.org/10.1016/j.jmrt.2022.06.172 Impact Factor : 6.267
  8. Anurag Namdev, Amit Telang Rajesh Purohit Kuldeep K Saxena, Sipokazi Mabuwa, Velaphi Msomi, Kahtan A Mohammed Optimization of dry sliding wear behaviour of epoxy nano composites under different conditions, Material Research Express, , vol. 96, pp. 1-14 , 2022. DOI : https://doi.org/10.1088/2053-1591/ac7514
  9. Anurag Namdev, Amit Telang Rajesh Purohit Manoj Kumar Agrawal An experimental assessment of abrasive wear behavior of GNP/Carbon fiber/epoxy hybrid composites, Indian journal of Engineering and Material Science, , vol. 29, pp. 779-787, 2022. DOI : DOI: 10.56042/ijems.v29i6.70309
  10. Anurag Namdev, Amit Telang Rajesh Purohit Experimental investigation on mechanical and wear properties of GNP/Carbon fiber/epoxy hybrid composites, Materials Research Express , , vol. 92, pp. 1-16, 2022. DOI : https://doi.org/10.1088/2053-1591/ac4e3f Impact Factor : 2.025
  11. Anurag Namdev, Amit Telang Rajesh Purohit Synthesis and Mechanical Characterization of Epoxy hybrid composites containing Graphene Nanoplatelets, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, , vol. 23614, pp. 7984-7998 , 2022. DOI : https://doi.org/10.1177/09544062221081286 Impact Factor : 1.758
  12. Abhishek Kumar Pandey, Arun Kumar Tiwari H.K. Paliwal Enhancement of mechanical, thermal and optical properties of TiO2 thin films using glancing angle deposition technique, Optical Materials, , , pp. 113054, 2022. DOI : https://doi.org/10.1016/j.optmat.2022.113054 Impact Factor : 3.754
  13. Rajesh Bajaj, Arun Kumar Tiwari Alokesh Pramanik Ashish Kumar Srivastava & Amit Rai Dixit Machining performance and sustainability analysis of PMEDM process using green dielectric fluid, Journal of the Brazilian Society of Mechanical Sciences and Engineering, , , pp. 17, 2022. DOI : https://doi.org/10.1007/s40430-022-03878-0 Impact Factor : 2.181
  14. Rahul Shukla, Arun Kumar Tiwari Sanjay Agarwal Assessment of machining performance parameters of nanofluid-based MQL-turning: An experimental analysis and CFD modelling, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, , , pp. 09544089221122049, 2022. DOI : https://doi.org/10.1177/09544089221122049 Impact Factor : 1.761
  15. Amit Kumar, Arun Kumar Tiwari Solar-assisted post-combustion carbon-capturing system retrofitted with coal-fired power plant towards net-zero future: A review, Journal of CO2 Utilization, , , pp. 102241, 2022. DOI : https://doi.org/10.1016/j.jcou.2022.102241 Impact Factor : 8.321
  16. Sakshi Tyagi, Pawan Kumar Singh Arun Kumar Tiwari Photovoltaic parameter extraction and optimisation of ZnO/GO based hybrid solar trigeneration system using SCAPS 1D, Energy for Sustainable Development, , , pp. 205-224, 2022. DOI : https://doi.org/10.1016/j.esd.2022.08.001 Impact Factor : 8.0
  17. Zafar Said, Prabhakar Sharma Rajvikram M Elavarasan Arun Kumar Tiwari, Manish K Rathod Exploring the specific heat capacity of water-based hybrid nanofluids for solar energy applications: A comparative evaluation of modern ensemble machine learning techniques, Journal of Energy Storage, , , pp. 105230, 2022. DOI : https://doi.org/10.1016/j.est.2022.105230 Impact Factor : 8.907
  18. Sumit Kumar, Arun Kumar Tiwari Performance evaluation of evacuated tube solar collector using boron nitride nanofluid, Sustainable Energy Technologies and Assessments, , , pp. 102466, 2022. DOI : https://doi.org/10.1016/j.seta.2022.102466 Impact Factor : 8.0
  19. Zafar Said, Mokhtar Ghodbane Boussad Boumeddane Arun Kumar Tiwari, L Syam Sundar, Changhe Li, Navid Aslfattahi, Evangelos Bellos Energy, exergy, economic and environmental (4E) analysis of a parabolic trough solar collector using MXene based silicone oil nanofluids, Solar Energy Materials and Solar Cells, , , pp. 111633, 2022. DOI : https://doi.org/10.1016/j.solmat.2022.111633 Impact Factor : 6.9
  20. Rahul Shukla, Arun Kumar Tiwari Sanjay Agarawal Effects of surfactant and MoO3 nanofluid on tribological and machining characteristics in minimum quantity lubrication (MQL)-turning of AISI 304 steel, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, , , pp. 09544089221105928, 2022. DOI : https://doi.org/10.1 177/09544089221105928 Impact Factor : 1.761
  21. Amit Kumar, Pammi Raj Gupta Arun Kumar Tiwari Zafar Said Performance evaluation of small scale solar organic Rankine cycle using MWCNT+ R141b nano refrigerant, Energy Conversion and Management, , , pp. 115631, 2022. DOI : https://doi.org/10.1016/j.enconman.2022.115631 Impact Factor : 11.53
  22. Zafar Said, Prabhakar Sharma Arun Kumar Tiwari Zuohua Huang, Van Ga Bui, Anh Tuan Hoang Application of novel framework based on ensemble boosted regression trees and Gaussian process regression in modelling thermal performance of small-scale Organic Rankine Cycle (ORC) using hybrid nanofluid, Journal of Cleaner Production, , , pp. 132194, 2022. DOI : https://doi.org/10.101 6/j.jclepro.2022.132194 Impact Factor : 11.1
  23. Avadesh K Sharma, Rajeev Singh Arun K Tiwari Ajay K Sharma Enhancement of Physical and Mechanical Characteristics of NiTi Composite Containing Ag and TiC, Journal of Materials Engineering and Performance, , , pp. 2934-2945, 2022. DOI : https://doi.org/10.1007/s11665-021-06451-3 Impact Factor : 2.099
  24. Ashiwani Kumar, Mukesh Kumar Arun Kumar Tiwari Analysis of Mechanical and Sliding Wear Performance of Hybrid AA7075-SiC/Gr/Cu Alloy Composites Fabricated by High Vacuum Stir Casting Process, Journal of Bio- and Tribo-Corrosion, , , , 2022. Impact Factor : 3.115
  25. Sonia Nawaz, Hamza Babar Hafiz Muhammad Ali Muhammad Usman Sajid, Muhammad Mansoor Janjua, Zafar Said, Arun Kumar Tiwari, L Syam Sundar, Changhe Li Oriented square shaped pin-fin heat sink: Performance evaluation employing mixture based on ethylene glycol/water graphene oxide nanofluid, Applied Thermal Engineering, , , pp. 118085, 2022. DOI : https://doi.org/10.1016/j.applthermaleng.2022.118085 Impact Factor : 6.4
  26. Mokhtar Ghodbane, Zafar Said Arun Kumar Tiwari L Syam Sundar, Changhe Li, Boussad Boumeddane 4E (energy, exergy, economic and environmental) investigation of LFR using MXene based silicone oil nanofluids, Sustainable Energy Technologies and Assessments, , , pp. 101715, 2022. DOI : https://doi.org/10.1016/j.seta.2021.101715 Impact Factor : 8.0
  27. Pammi Raj Gupta, Arun Kumar Tiwari Zafar Said Solar organic Rankine cycle and its poly-generation applications–A review, Sustainable Energy Technologies and Assessments, , , pp. 101732, 2022. DOI : https://doi.org/10.1016/j.seta.2021.101732 Impact Factor : 8.0

2021

  1. Vikas Kumar, Ashutosh Pare Arun Kumar Tiwari Subrata Kumar Ghosh Efficacy evaluation of oxide-MWCNT water hybrid nanofluids: An experimental and artificial neural network approach., Colloids and Surfaces A: Physicochemical and Engineering Aspects, , , pp. Volume 620, 5 July 2021, 126562, 2021. DOI : https://doi.org/10.1016/j.colsurfa.2021.126562 Impact Factor : 3.990
  2. Avadesh K Sharma, Rajeev Singh Arun Kumar Tiwari Ajay K Sharma Enhancement of Physical and Mechanical characteristics of Ni Ti Composite containing Ag and TiC, Journal of Materials Engineering and Performance, , vol. 31, pp. 2934–2945 , 2021. DOI : DOI : https://doi.org/10.1007/s11665-021-06451-3 Impact Factor : 2.036
  3. Aarasi Singh, Vinod Kumar Yadav et al Estimation of performance parameter of Top-Lit up draft cookstove using locally available wood feedstock, International Journal of Energy for a Clean Environment, , vol. 226, pp. 129-146, 2021.
  4. Avadesh K Sharma, Rajeev Singh Arun K Tiwari Ajay K Sharma Enhancement of Physical and Mechanical characteristics of NiTi Composite containing Ag and TiC, Journal of Materials Engineering and Performance, , vol. 31,, pp. 2934–2945, 2021. DOI : https://doi.org/10.1007/s11665-021-06451-3 Impact Factor : 2.036
  5. R. Singh, A. K. Sharma A. K. Sharma Nickel-titanium based nanocomposites for orthopedic applications: The effects of Reinforcements, Digest Journal of Nanomaterials and Biostructures, , vol. Vol. 164, pp. 1501-1518, 2021. Impact Factor : 0.899
  6. Krishan Kumar Patel, Rajesh Purohit Sar Hashmi Anurag Namdev, Rakesh Singh Influence of moisture on microwave-induced shape memory thermoplastic polyurethane/graphene nanoplatelets composite, "SADHANA - Academy Proceedings In Engineering Sciences, , vol. 46, pp. 1-11, 2021. DOI : https://doi.org/10.1007/s12046-021-01759-1 Impact Factor : 1.214
  7. Anurag Namdev, Amit Telang Rajesh Purohit Ashish Kumar The effect of inter critical heat treatment on mechanical and wear properties of AISI 1015 steel, Advances in Materials and Processing Technologies , , vol. 8, pp. 434-444, 2021. DOI : https://doi.org/10.1080/2374068X.2021.1945307
  8. Anurag Namdev, Amit Telang Rajesh Purohit Effect of Graphene Nano Platelets on Mechanical and Physical Properties of Carbon Fibre/Epoxy Hybrid Composites, Advances in Materials and Processing Technologies , , vol. 8, , 2021. DOI : https://doi.org/10.1080/2374068X.2021.1939557
  9. Aparna Singh, Shailendra Sinha Akhilesh Kumar Choudhary Optimization of Operating Parameters of Diesel Engine Powered with Jatropha Oil Diesel Blend by Employing Response Surface Methodology, International Journal of Renewable Energy Research, , , pp. 504-513, 2021. Impact Factor : 5.127
  10. shailendra kumar verma, vineet dubey shailendra sinha A review on additive mixed electrical discharge machining processes, Materials Today: Proceedings -Scopus, Publisher: Elsevier, , , pp. 709-715, 2021. DOI : doi.org/10.1016/j.matpr.2020.10.615
  11. Zafar Said, L Syam Sundar Arun Kumar Tiwari Hafiz Muhammad Ali, Mohsen Sheikholeslami, Evangelos Bellos, Hamza Babar, Recent advances on the fundamental physical phenomena behind stability, dynamic motion, thermophysical properties, heat transport, applications, and challenges of nanofluids, Physics Reports, , , , 2021. DOI : https://doi.org/10.1016/j.physrep.2021.07.002 Impact Factor : 25.8
  12. Zafar Said, Mokhtar Ghodbane Arun Kumar Tiwari Hafiz Muhammad Ali, Boussad Boumeddane, Ziad M Ali, 4E (Energy, Exergy, Economic, and Environment) examination of a small LFR solar water heater: An experimental and numerical study, Case Studies in Thermal Engineering, , , pp. Elsevier, 2021. DOI : https://doi.org/10.1016/j.csite.2021.101277
  13. Sakshi Tyagi, Pawan Kumar Singh Arun Kumar Tiwari Pritam Pain Optimization and Comparison of Photovoltaic Parameters of Zinc Oxide (ZnO)/Graphene Oxide (GO) and Zinc Oxide (ZnO)/Carbon Quantum Dots (CQDs) Hybrid solar cell using Firefly Algorithm for application in Solar Trigeneration System in Commercial Buildings, Sustainable Energy Technologies and Assessments, , , pp. 101357, 2021. DOI : https://doi.org/10.1016/j.seta.2021.101357 Impact Factor : 5.353
  14. Amit Kumar , Arun Kumar Tiwari Zafar Said A comprehensive review analysis on advances of evacuated tube solar collector using nanofluids and PCM, Sustainable Energy Technologies and Assessments , , , pp. 101417, 2021. DOI : https://doi.org/10.1016/j.seta.2021.101417 Impact Factor : 5.353
  15. Naveen Kumar, Deepak Singh, Abhishek Nigam, Omprakash Rajpoot, Mayank Kumar, Yadav, Yogendra Pratap Singh, P. Shakti Prakash, Samarjit Singh Structural and magnetic properties of zinc doped copper ferrite synthesized by sol-gel and hydrothermal route, MATERIALS PHYSICS AND MECHANICS, , , pp. 306-314, 2021. DOI : 10.18149/MPM.4722021_12 Impact Factor : 0.73
  16. Rajeev Singh, Avadesh K Sharma Ajay Kumar Sharma Design and development of modified cold compaction die for fabrication of nickel-titanium composite, IOP Conference Series: Materials Science and Engineering, , , , 2021.
  17. Rajeev Singh, Avadesh K Sharma Ajay Kumar Sharma Physical and mechanical behavior of NiTi composite fabricated by newly developed uni-axial compaction die, Materials Research, , , , 2021. DOI : http://dx.doi.org/10.1590/1980-5373-mr-2020-0549 Impact Factor : 1.511
  18. Sunil Kumar, Devendra Singh Ajay Kumar Sharma Experimental performance of bael biodiesel as a fuel in a CI engine, journal of xidian , , , , 2021.
  19. Vivek Bahadur, Devendra Singh Ajay Kumar Sharma Akhand Pratap Singh Experimental investigations on a single basin double slope solar still, journal of xidian, , , , 2021.
  20. Arun Kumar Tiwari, Naimish S Pandya Zafar Said Hakan F Öztop, Nidal Abu-Hamdeh 4S consideration (synthesis, sonication, surfactant, stability) for the thermal conductivity of CeO2 with MWCNT and water based hybrid nanofluid: An experimental assessment., Colloids and Surfaces A: Physicochemical and Engineering Aspects, , , pp. 125918, 2021. DOI : https://doi.org/10.1016/j.colsurfa.2020.125918 Impact Factor : 3.99