IET Lucknow

The modern power grid is gravitating towards power electronic inverter dominated system as most of the renewable generation system uses power electronic converters as an interface to the power grid. The penetration level of Distributed Generation (DG) units is rising rapidly in power system with regard to its overall power capacity. So, the inverter control need to be adjusted to different operating modes microgrid.

Every integrated circuit relies on power, and the global innovation guide to semiconductors lists power usage as one of the most pressing issues. In an integrated circuit, the clock distribution system and flip-flop clock divider typically use and make the most internal transitions, which uses a lot of energy. The clock signal circulates via the clock distribution system from a typical location to each and every component needed for the circuit. Even though the synchronous framework values this capability higher, the characteristics of these clock signals need to be taken into account.

The majority of full adder (FA) circuits are implemented employing three separate modules in a hybrid logic architecture. The main distinguishing feature of these hybrid logic style-based FA cells is that each module can be individually adjusted to increase circuit performance. With pass, a high-performance 1-bit hybrid FA cell is presented. In this paper, transistor logic and transmission gate logic are used. The proposed FA circuit is realized with the help of to get the best results, you'll need 20 transistors.

The development of manufacturers and designers is looking the methods for conventional smaller-sized and high-performance devices with the circuit reduced the power consumption and enhanced the gain margin, phase margin is the most important parameter of an operational transconductance amplifier (OTAs). Which have become essential building blocks of many modern analogy and mixed–the signal circuit is used as a key element in a wide variety of circuits that benefit from voltage control.

Accuracy Configurable Adder (ACA) is 28.36% faster and consumes 30.11% less power than Ripple Carry Adder (RCA). Power Delay Product (PDP) is the figure of merit for digital logic circuits. The less is the value of PDP, the more Energy-efficient is circuit. ACA provides 47% less PDP and 62% less Energy Delay Product (EDP) as compared to RCA.